Outstanding Info About How To Build A Stimp Meter

The stimpmeter is a device used to measure the speed of a golf course putting green by applying a known velocity to a golf ball and measuring the distance traveled in feet.

How to build a stimp meter. The lower calculator does the math for the stimpmeter rating, using the 4 direction process described in this text. Place the ball in the notch and slowly raise the. Enter the number of inches or centimeters that the ball rolls on.

(with a 3 car garage and room for a garage simulator!) now onto recapping 2021 have 20 counted rounds in. It's easy to measure the speed of your greens with a simple accurate diy stamp meter you can make yourself inexpensively. The key specific is that ramp must be set to a precise 20.5 degree.

Using a tape measure from the base of the stimpmeter (where it is touching the ground), you measure the distance the ball rolled in feet. You do this three times and calculate. To build your own stimpmeter go to your home center and get a 4 foot section of moulding called cove moulding ( $4.00).

Determine the speed of your putting green or mat You can start small with a small notch. A stimpmeter is an inclined ramp that can be any length, with a starting point for the golf ball 30 inches from the bottom end.

Notch on the top side of the stimpmeter), rest the tapered end on the ground beside the tee, and aim it in the direction you intend to roll the ball. Making it bigger until at 12 inches. To build your own stimpmeter go to your home center and get a 4 foot section of moulding called cove moulding ( $4.00).

This moulding is flat on the back with a perfect. So you’ll fine tune the notch. Next, connect the voltmeter to one lead of the battery and the other lead to ground.